Omron CP2E User Manual

7
Cost reduction in maintenance,
logistic/stock
Stable multipoint temperature control,
setting via NB series HMI
Small extrusion machine
CP1W-TS004
12-ch Temperature Sensor Unit
CP2E
Pressure/position
Inverter control
Temperature
Sensor
NB
Extended operational temperature range
Increase reliability in special
applications
Temperature Sensor
Battery-free operation*
Automatic Recovery by electric
interferences.
Normal operation continues
CP2E detects and recovers
in real-time operation a bit
corruption.
Increase machine efficiency
avoiding CPU stops.
PID Control with auto tuning
RS-232C
(Time)
(Temperature)
Hunting Overshooting
Temperature
control (PID)
CP1W-MAD44
4 inputs/4 outputs
Analog I/O Unit
Stable temperature control with autotuning function
CP2E-N/CP2E-S/CP2E-E
PID with Autotuning function
enable stable temperature
control reducing start-up time.
Connection with stand alone
temperature control is also
available.
Install and forget: reliable solution
for all environmental conditions
Grain storage
facility
Waste disposal
equipment
Multi-level
parking
-20 to 60℃
* Needed only in case Real Time Clock is used.
Reduce installation time
and easily check wiring
errors by LED indicators
I/O LED indicators
CP2E-N/CP2E-S/CP2E-E
FB
PID Control with auto tuning

Omron CP2E Specifications

General

Expansion I/O Units	Up to 7 units
Model	CP2E
Type	Programmable Logic Controller (PLC)
Analog Inputs	Available via expansion units
Analog Outputs	Available via expansion units
Communication Ports	RS-232C
Ethernet Port	Yes
Power Supply	100 to 240 VAC or 24 VDC (depending on the model)