How to Use Data Trace Recording Tool Appendix
245
Explanation for Each Part of the Window
Names and Functions
Item Description Limit of values
Target PLC to
Trace
Specify the FINS address for the PLC where data tracing will
be performed.
Only network/node address can be input.
Network: 0 to 127
Node: 1 to 126
Unit: 0(fixed)
Sampling Area Register addresses where bits and words are sampled.
[Edit]: Edit bit/word addresses in the Sampling Address Set-
ting window.
Set at least one to either of bits or words within the range on
the right.
Number of bits: 0 to 31
Number of words: 0 to 6
Sampling interval Set the sampling conditions with the radio button.
Interval Set the sampling interval as "fixed" and enter the interval in the
text box (unit: ms).
10 to 2550
Per cycle Trace per cycle of the ladder program.
Abort Value Specify the value for exiting the data tracing.
Type Specify either of after getting specified number of samples or
after specified time elapsed.
Samples Specify the value for exiting the data tracing. 1 to 65535
Trace
elapsed
Specify the time for tracing. 1 to 65535
Unit Specify the unit for the time above: either of second, minute, or
hour.
Trace Data Record
File
Specify the file name for saving the sampling data: either in a
relative path or in an absolute path.
A network name can not
be specified.
Browse Display the File Name Setting dialog.
Options settings Set options regarding trace data saving.
Target PLC to
Trace
Sampling
interval
Trace Data
Record file
Trace Status
Write settings
button
Read settings
button
Sampling Area
Abort Value
Start button
Exit button
Options button
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
To Next Page
Loading...
Need help?
General
