Omron E32 - Page 13

E39
Fiber accessories
13
4
Fibers accessories
Accessories
Shape Type Comment Order code
Focal lens - Extends sensing distance by more than 500%
- For M4 Through beam fibers E32-TC200, E32-ET11R, E32-T11 (fits M2.6 thread)
- 2 pcs per set
E39-F1
Focal lens (side view) - For M4 through beam fibers E32-TC200, E32-ET11R, E32-T11,
E32-T61-S, E32-T81R-S (fits M2.6 thread)
- Temperature range -40°C to +200°C
- 2 pcs per set
E39-F2
Focal lens (variable) - For precision detection with E32-D32 E39-F3A
Focal lens - For precision detection with E32-EC41 E39-F3A-5
Focal lens - For precision detection with E32-EC41 E39-F3B
Focal lens (side view, variable) - For precision detection with E32-EC31 E39-EF51
Focal lens (heat resistant) - Extends sensing distance by more than 500%
- For M4 through beam fibers E32-ET51, E32-T61, E32-T61-S,
E32-T81R, E32-T81R-S (fits M4 thread)
- Temperature range -60°C to +350°C
- 2 pcs per set
E39-EF1-37
Focal lens (vaccuum resistant,
heat resistant)
- Fits E32-T51V and E32-T54V (fits M2.6 thread)
- 2 units per set
- Heat resistant up to 120°C
E39-F1V
Fiber cutter - Included in applicable fiber E39-F4
Thin fiber attachment - Amplifier adapter for thin fibers
- Included in applicable fiber (2 sets)
E39-F9
Sleeve bender - For E32-TC200B(4)
- For E32-TC200F(4)
- For E32-DC200F(4)
E39-F11
Single fiber extension
connector
- Fiber extension connector for 2.2 mm dia standard fibers
- One unit
E39-F10
Dual fiber extension connector - For fibers with dia 2.2 E39-F13
- For fiber with dia 1.0 E39-F14
- For fibers with dia between 1.0 and 2.2 E39-F15
Protective spiral tube
*1
*1
Protective spiral tubes with 0.5 m length are available. Add '5' to order code…e.g. E39-F32A5
- For M3 diffuse type sensors
- Length 1 m
E39-F32A
- For M3 through beam type sensors
- Length 1 m
E39-F32B
- For M4 through beam type sensors
- Length 1 m
E39-F32C
- For M6 diffuse type sensors
- Length 1 m
E39-F32D
Fiber on roll
*2
*2
Fiber length 100 m on a roll - cuttable
- Dia 2.2 mm
- Standard monocore, 10 mm bending radius
- -40°C to 80°C
E32-E01 100M
- Dia 1.1 mm
- Standard monocore, 4 mm bending radius
- -40°C to 80°C
E32-E02 100M
- Dia 2.2 mm
- High flex multicore, 1 mm bending radius
- -40°C to 80°C
E32-E01R 100M
- Dia 1.1 mm
- High flex multicore, 1 mm bending radius
- -40°C to 80°C
E32-E02R 100M
- Dia 2.2 mm
- High temperature monocore, 20 mm bending radius
- -60°C to 150°C
E32-E05 100M
Reflectors - Size 60 x 40.3 x 7.5 E39-R1S
- Size 42 x 22.5 x 11 E39-R3