Omron E3S-A - Page 2

E3S-A
*1. Values in brackets are the minimum required distance between the Sensor and Reflector.
*2. The following models are available with 200-mm sensing distances: E3S-AD14 and E3S-AD64.
Accessories (Order Separately)
Insert-type Long Slit
Mutual Interference Prevention Filters
Reflectors/Other Accessories
Note: When using any Reflector other than the provided one, use a sensing distance of approximately 0.7 times the typical value as a guide.
* Values in brackets are the minimum required distance between the Sensor and Reflector.
Diffuse-reflective
Sensors
Pre-wired
--- E3S-AD13 *2E3S-AD33
E3S-AD23 E3S-AD43
--- E3S-AD11 E3S-AD31
E3S-AD21 E3S-AD41
--- E3S-AD12 E3S-AD32
E3S-AD22 E3S-AD42
Connector
(M12)
---
E3S-AD18 E3S-AD38
E3S-AD16 E3S-AD36
E3S-AD17 E3S-AD37
Pre-wired
--- E3S-AD63 *2E3S-AD83
E3S-AD73 E3S-AD93
--- E3S-AD61 E3S-AD81
E3S-AD71 E3S-AD91
--- E3S-AD62 E3S-AD82
E3S-AD72 E3S-AD92
Connector
(M12)
---
E3S-AD68 E3S-AD88
E3S-AD66 E3S-AD86
E3S-AD67 E3S-AD87
Slit width Sensing distance
Minimum sensing
object (typical)
Model Quantity Remarks
0.5 mm × 11.1 mm
500 mm
0.2-mm dia.
E39-S46
1 of each for Emitter/
Receiver (4 Slits total)
Slits can be used with the E3S-
AT@@ Through-beam
Sensor.➜Page 10
1 mm × 11.1 mm
1.1 m
0.4-mm dia.
2 mm × 13.6 mm
2.5 m
0.8-mm dia.
1 of each for Emitter/
Receiver (2 Slits total)
Sensing distance Model Quantity Remarks
2.4 m E39-E6
2 of each for Emitter/Receiver
(4 Filters total)
Can be used with the E3S-AT@@ Through-beam Sensor.
➜ Page 11
Name Sensing distance (typical) Model Quantity Remarks
Reflectors
2 m (100 mm) *
(rated value)
E39-R1 1 Provided with E3S-AR@@ Retro-reflective Sensor.
Small Reflectors
1.3 m (100 mm) * E39-R3 1 ---
600 mm (70 mm) * E39-R4 1 ---
Tape Reflectors
450 mm (100 mm) * E39-RS1 1
Enables MSR function.700 mm (100 mm) * E39-RS2 1
900 mm (100 mm) * E39-RS3 1
Optical Axis
Confirmation Reflector
--- E39-R5 1
Used to check optical axis for the E3S-AT@@
Through-beam Sensor.
Sensing method Appearance
Connection
method
Sensing distance Functions
Model
NPN output PNP output
Horizontal
100 mm (wide view)
Timer
Self Diagnosis
200 mm
Timer
Self Diagnosis
Tu rb o
700 mm
Timer
Self Diagnosis
Tu rb o
100 mm (wide view)
200 mm
700 mm
Vertical
100 mm (wide view)
Timer
Self Diagnosis
200 mm
Timer
Self Diagnosis
Tu rb o
700 mm
Timer
Self Diagnosis
100 mm (wide view)
200 mm
700 mm
http://www.ia.omron.com/
2
(c)Copyright OMRON Corporation 2008 All Rights Reserved.
Downloaded from Elcodis.com electronic components distributor