E3S-A
Mounting Brackets/Other
Note: If a Through-beam Model is used, order two Mounting Brackets, one for the Emitter and one for the Receiver.
Sensors I/O Connectors
Sensors I/O Connectors
Appearance Model Quantity Remarks
E39-L69 1 Provided with E3S-A Horizontal Sensors.
E39-L70 1 Provided with E3S-A Vertical Sensors.
E39-L59 1
Provided with E3S-A Vertical Pre-wired
Sensors.
E39-L81 1
Provided with E3S-A Vertical Connector
Sensors.
E39-L97 1
Protective Cover for Horizontal Sensors
Note: When mounting Sensors with Connectors, the
Sensor I/O Connector will come into contact
with the Bracket. Mount the Sensor with care.
E39-L98 1
Protective Cover for Vertical Sensors
Note: When mounting Sensors with Connectors, the
Sensor I/O Connector will be longer. Mount the
Sensor with care.
E39-L60 1
Close Mounting Plate:
Provided with E3S-A Connector Sensors.
Model Quantity Remarks
E39-G2 1 Provided with product.
Cable Appearance Cable type Model
Standard
2 m
3-wire
XS2F-D421-DC0-A
5 m
XS2F-D421-GC0-A
2 m
XS2F-D422-DC0-A
5 m
XS2F-D422-GC0-A
Straight
L-shaped
http://www.ia.omron.com/
3
(c)Copyright OMRON Corporation 2008 All Rights Reserved.
To Next Page
Loading...
