Omron E3X-DA-N - Typical Operating Range; Excess Gain Ratio vs. Distance (Typical); Sensing Distance vs. Operating Range; Differential Travel vs. Sensing Distance

A-431E3X-DA-N
E3X-DA-N
TEACH
Sensing function Displayed as "F".
Standard
(factory-set)
Super-high speed
Super-long distance
OFF
(factory-set)
Peak
Bottom
Timer function Displayed as "t".
0
(Factory-set)
Adjustable in 1-ms units for
0 to 20 ms and in 5-ms units
for higher.
200
Flashing setting Displayed as "L".
OFF
(factory-set)
ON
Hold setting Displayed as "H".
Display orientation
setting
Reversing display
Standard
(factory-set)
Reverse
Digital incident level display
Setting upper
limit for monitoring
Alternates between
"A-UP" and setting value.
(Factory setting)
Note: It is not possible to set an upper limit
that is lower than the lower limit.
Setting lower
limit for monitoring
Alternates between
"A-LO" and setting value.
(Factory setting)
Note: It is not possible to set an lower limit
that is lower than the upper limit.
Available with: E3X-DA21-N
E3X-DA51-N
E3X-DA7
E3X-DA9
Monitor Focus
(A)(B)
(A)(B)
Setting Functions in SET Mode4
2s
2s
MODE
TEACH
TEACH
MODE
SET
TEACH
TEACH
2s
2s
TEACH
MODE
MODE
TEACH
TEACH
2s
TEACH
TEACH
TEACH
TEACH
MODE
TEACH
2s
TEACH
TEACH
MODE
Alternates
Alternates
In units of 100 from 4,000
TEACH
MODE
TEACH
TEACH
TEACH
TEACH
Alternates
Alternates
Alternates
In units of 100 from 0
Alternates
Alternates
TEACH
Alternates
Set the mode selector
to .
SET
There are four different sensitivity settings. Refer to page AB- for
details.