Omron E3X-NA11 - Page 24

24
E3X-NAE3X-NA
*
1
Sensing distance indicates values for white paper.
*
2
For continuous operation, use the products within a temperature range of −40
°
C to 130
°
C.
*
3
Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin.
*
4
Indicates the heat-resistant temperature at the fiber tip.
Note: The values of the minimum sensing target indicate those obtained at a distance where the smallest object can be sensed with the
Reflective Fiber Unit.
Heat-
resistant
Resists 150°C
*2; fiber
sheath materi-
al: fluororesin (operating
ambient temperature:
−40°Cto150°C)
E3X-NA@ (V) 150×150
(0.03-mm dia.)
35 mm
E3X-NA@F50×50
(0.03-mm dia.)
Resists 300°C*4;
fiber sheath material:
stainless steel (operating
ambient temperature:
−40°Cto300°C)
E3X-NA@ (V) 100×100
(0.03-mm dia.)
E32-D61 25 mm
E3X-NA@F25×25
(0.03-mm dia.)
Resists 400°C *4; fiber
sheath material: stain-
less steel (operating am-
bient temperature:
−40°Cto400°C)
E3X-NA@ (V) 50×50
(0.03-mm dia.)
E32-D73
E3X-NA@F25×25
(0.03-mm dia.)
Area sensing
Side-view;
detection
over wide
areas
E3X-NA@ (V) 100×100
(0.03-mm dia.)
25 mm
E3X-NA@F50×50
(0.03-mm dia.)
Retroreflec-
tive
Transparent
object detec-
tion; polar-
ized
E3X-NA@ (V) 35-mm dia.
(0.3-mm dia.)
10 mm
E3X-NA@F 35-mm dia.
(0.5-mm dia.)
Transparent
object detec-
tion, polarized
(operating ambient temper-
ature:
−25°Cto55°C);
enclosure rating: IEC
60529 IP66
E3X-NA@ (V) 35-mm dia.
(0.6-mm dia.)
25 mm
E3X-NA@F 35-mm dia.
(4.0-mm dia.)
Limited
reflective
Suitable for
positioning
crystal glass
E3X-NA@ (V) --- 35 mm
E3X-NA@F
Detects
wafers and
small differ-
ences in height;
(operating ambient
temperature:
−40°Cto105°C);
enclosure rating: IEC
60529 IP50
E3X-NA@ (V) 25×25
(0.015-mm dia.)
10 mm
E3X-NA@F25×25
(0.03-mm dia.)
E3X-NA@ (V) 25×25
(0.015-mm dia.)
E3X-NA@F25×25
(0.03-mm dia.)
Detects
wafers and
small
differences in height;
enclosure rating:
IEC 60529 IP50
E3X-NA@ (V) 25×25
(0.015-mm dia.)
25 mm
E3X-NA@F25×25
(0.03-mm dia.)
E3X-NA@ (V) 25×25
(0.015-mm dia.)
E3X-NA@F25×25
(0.03-mm dia.)
Fluid-
level
detection
Fluid contact type:
unbendable section
L 150 mm, 350 mm
(two types)
E3X-NA@ (V) --- --- E32-D82F1
E32-D82F2
40 mm
E3X-NA@F ---
Tube-
mounting
type
E3X-NA@ (V) --- --- 10 mm
E3X-NA@F ---
Application Features Appearance Applicable
Amplifier Unit
Sensing distance (mm) *1
Standard object
(see note) (min.
sensing target:
Gold wire)
Part
number
Permis-
sible
bending
radius
Free-cut
M6 screw
120
E32-D51
40
M6 screw
45
15
M4 screw
1.25-mm dia.
30
10
Free-cut
75
E32-D36P1
25
Free-cut
M6 screw
Reflector
E39-R3
10 to 250
E32-R21
+E39-R3
(Attachment)
10 to 250
Free-cut
Reflector
E39-R1
150
to
1,500
E32-R16
+E39-R1
(Attachment)
150
to
1,000
Free-cut
4 to12
E32-L56E1
E32-L56E2
4 to12
Free-cut
4±2
E32-L24L
4±2
7.2±1.8
E32-L25L
7.2±1.8
Free-cut
3.3
E32-L25
3.3
3.3
E32-L25A
3.3
L
Free-cut
E32-L25T