Simplicity on the Worksite Solutions Guide for FAQs: E5CC/E5EC
Using ON/OFF Control
2-3
Using ON/OFF Control
You set this parameter in the Adjustment Level. The parameter is set to 1.0°C by default.
3 Setting the Hysteresis
Turn ON the power supply.
1
Press the
(Level) Key for less
than 1 second.
Operating Display
Change the parameter with the Key .
2
←
l.adj
(L.ADJ) will be displayed
to show that the Adjustment
Level has been entered.
The four numeric digits that
identify the product code are
displayed.
←
hys
(HYS): Indicates the Hysteresis parameter.
←Default setting is
1.0
(1.0°C).
Press the (Mode) Key
several times to display
hys
(HYS).
Change the set value with the
(Up and Down) Keys.
Set the parameter with the Keys.
3
Adjustment Level
Adjustment Level
Adjustment Level
(When finished, press the (Level) Key to return to the
operation display.)
Simplicity on the Worksite Solutions Guide for FAQs: E5CC/E5EC
To Next Page
Loading...
