How to fix over-inflated cuff on Omron ELITE 7300W?
If the cuff is over-inflated on your Omron Blood Pressure Monitor, remove the arm cuff, read the section on "Taking a Measurement," and then take another measurement.
What to do if the batteries are worn in my Omron Blood Pressure Monitor?
If your Omron Blood Pressure Monitor batteries are worn, replace all four batteries. Consult the section on "Battery Installation" for guidance.
What to do if my Omron ELITE 7300W Blood Pressure Monitor cannot detect pulse wave?
If the Omron Blood Pressure Monitor could not detect a pulse wave, take another measurement and remain still until the measurement is complete.
General| Brand | Omron |
|---|---|
| Model | ELITE 7300W |
| Category | Blood Pressure Monitor |
| Language | English |
Explains the meaning of WARNING and CAUTION symbols used in the manual.
Provides initial safety precautions for operating the blood pressure monitor.
Instructions for maintaining the monitor and its components to ensure optimal condition.
Instructions for replacing the batteries when the low battery indicator appears on the display.
Guide to select the correct arm cuff size based on arm circumference.
Detailed instructions for correctly applying the arm cuff to the left arm.
Lists common error symbols, their causes, and recommended correction methods.
Provides solutions for common problems encountered when using the blood pressure monitor.
To Next Page
