13
2. PREPARATION
3. Replace the battery cover.
When the batteries have been securely placed in this monitor, the message
below will appear on the screen:
Notes:
• When the depleted battery symbol “ ” appears on the display, turn the
monitor off and remove all the batteries. Replace with 4 new batteries at the
same time. Long life alkaline batteries are recommended.
• The measurement values continue to be stored in the memory even after the
batteries are replaced.
• The supplied batteries may have a shorter life than new batteries.
• Disposal of used batteries should be carried out in accordance with the
national/local regulations for the disposal of batteries.
• When the batteries are replaced, the words “Please pair this device.” or
“Pairing not completed. No data transfer.” will appear on the display. Press
the [ ] button to pair with the smart device or transfer the data before taking
a measurement.
To Next Page
Loading...
