21
4. USING THE MONITOR WITH A SMART DEVICE
2. Remove the arm cuff.
3. Transfer your readings.
Make sure your monitor is within 16 ft. (5 m) of your smart device.
As soon as your measurement is complete, open the OMRON connect US/
CAN app on your smart device to transfer your readings.
Transferring
your readings later
1. Open the app on your smart device and then follow the instructions.
2. Press [ ] button to transfer your readings.
• If your readings are successfully transferred to your smart device, “OK”
will flash on the display.
If “Error” appears, refer to section 5.1 for more detail.
Notes:
• When the SYNC symbol “ ” appears on the display, transfer the data
immediately before the readings are deleted.
• When the Connection OFF symbol “ ” appears on the display, turn on the
Bluetooth feature of your monitor. (Refer to section 4.3)
To Next Page
Loading...
