Omron F3SJ-A series Manual

F3SJ-E/F3SJ-B/F3SJ-A
36
Safety Precautions
Description shown below is only a guideline to choose a safety
sensor. To use the product properly, you must read its instruction
manual that comes with the product.
Legislation and Standards
1. Application of a sensor alone cannot receive type approval
provide
d by Article 44-2 of the Industrial Safety and Health Act
of
Japan
. It is necessary to apply it in a system.
Therefore, when using the F3SJ in Japan as a "safety system for
pressing or
shearing machines" prescribed in Article 42 of that law,
the system must receive type approval.
2. The F3SJ is electro-sensitive protective equipment (ESPE)
in
accorda
nce with European Union (EU) Machinery Directive
Index
A
nnex V, Item 2.
3. T
he F3SJ-E/B is in conformity with the following standards:
(1) EC legislation
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
(2) European standards
EN 61496-1 (type 4 ESPE),
EN 61496-2 (type 4 AOPD),
EN 61508-1 through -3 (SIL3),
EN 61000-6-4,
EN ISO 13849-1:2008 (PLe/Safety Category 4)
(3) International standards
IEC 61496-1 (type 4 ESPE),
IEC 61496-2 (type 4 AOPD),
IEC 61508-1 through -3 (SIL3),
ISO 13849-1:2006 (PLe/Safety Category 4)
(4) JIS standards
JIS B 9704-1 (type 4 ESPE),
JIS B 9704-2 (type 4 AOPD)
(5) North American standards:
UL 61496-1 (type 4 ESPE),
UL 614
96-2 (type 4 AOPD),
UL 508, UL 1998, CAN/CSA C22.2 No.14,
CAN/CSA C22.2 No.0.8
4.
The F
3SJ-A is in conformity with the following standards:
(1) EC
legislation
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
(2) European standards
EN 61496-1 (type 4 ESPE),
EN 61496-2 (type 4 AOPD),
EN61508-1 through -3 (SIL3)
EN ISO 13849-1:2008 (PLe/Safety Category 4)
(3) International standardsI
EC 61496-1 (type 4 ESPE),
IEC 61496-2 (type 4 AOPD),
IEC 61508-1 through -3 (SIL3)
ISO13849-1: 2006 (PLe/Safety Category 4)
(4) JIS standards
JIS B 9704-1 (type 4 ESPE),
JIS B 9704-2 (type 4 AOPD)
(
5) North
American standards:
UL 61496-1 (type 4 ESPE),
UL 61496-
2 (type 4 AOPD),
UL 508, UL 1998, CAN/CSA C22.2 No.14,
CAN/CSA C22.2 No.0.8
5. The F3SJ received the following certification from the EU-
accredited body, TÜV SÜD:
• EC type test based on machinery directive
Type 4 ESPE (EN 61496-1),
Type 4 AOPD (EN 61496-2)
6. The F3SJ is scheduled to received certificates of UL
listing for US
and
Canadian safety standards from the Third Par
ty Assessment
Body UL.
•
Type 4 ESPE (UL 61496-1),
Type 4 AOPD (UL 61496-2)
7. The F3SJ is designed according to the standards listed belo
w. To
make sure th
at the final system complies with th
e following
standar
ds and regulations, you are asked to design and use it
in
accordance with
all other related standards, laws, and regulations.
If you have any questions, consult with specialized org
anizations
such as the body responsib
le for prescribing and/or enforcing
machinery safety regulations in the location where
the equipment
is
to be used.
• European standards: EN 415-4, EN 692, EN 693
• US Occupational Safety and Health Standards: OSHA 29 CFR
1910.212
• US Occupational Safety and Health Standards: OSHA 29 CFR
1910.217
• American National Standards: ANSI B11.1 to B11.19
• American National Standards: ANSI/RIA 15.06
• Canadian Standards Association CSA Z142, Z432, Z434
• SEMI Standards SEMI S2
8. We have obtained S-Mark Certification fr
om Legislation and
Standards Korea Occupational Safety & Health Agency (KOSHA).
(F3SJ-A@@@@P@@-S series only)

Omron F3SJ-A series Specifications

General

Brand	Omron
Model	F3SJ-A series
Category	Accessories
Language	English