INSTRUCTION MANUAL
(SETUP)
FZ3-30_-10/FZ3-35_-10/FZ3-H30_-10/FZ3-H35_-10
FZ3-70_-10/FZ3-75_-10/FZ3-H70_-10/FZ3-H75_-10
FZ3-90_-10/FZ3-95_-10/FZ3-H90_-10/FZ3-H95_-10
FZD-50_-10/FZD-55_-10
Vision Sensor
OMRON Corporation 2009 All Rights Reserved.
FZ Series
Thank you for selecting the FZ Series Vision Sensor.
This manual explains how to use the FZ Series Vision Sensor.
When using the FZ Series Vision Sensor, make sure to observe the following:
• The FZ Series Vision Sensor must be operated by personnel
knowledgeable in electrical engineering.
• To ensure correct use, please read this manual thoroughly to deepen your
understanding of the product.
•
Please keep this manual in a safe place so that it can be referred to whenever necessary.
㧖
The meaning of “_” in model is described below.
0:NPN I/O type 5:PNP I/O type
TRACEABILITY INFORMATION:
Representative in EU:
Omron Europe B.V.
Wegalaan 67-69 2132 JD Hoofddorp,The Netherlands
Manufacturer:
Omron Corporation, Sensing Devices & Components Div. H.Q.,
Application Sensors Division
Shiokoji Horikawa,Shimogyo-ku, Kyoto 600-8530 JAPAN
NOTICE:
This product meets CISPR11 class A.
The intended use of this product is in an industrial environment only.
5319282-8C
fz3_4ch_setup_E.book Page 1 Friday, August 7, 2009 5:45 PM
To Next Page
Need help?
General
