Omron fh series Startup Guide

33
7
Saving the downloaded settings
and programs
After the download process is
complete and you make sure that
there are no errors in the Output
Window, run the save command
from the Terminal tab page.
* The save command stores the
downloaded project in the
Controller. This operation saves the
settings to be executed
automatically when the power to
the Controller is turned on.
8
Restarting after download
Run the following command from
the Terminal tab page to restart the
Controller with the downloaded
project.
$$$

Omron fh series Specifications

General

Type	Machine Vision System
Series	FH Series
Power Supply	24 VDC
Storage Temperature	-20 to 60°C
Humidity	35 to 85% RH (non-condensing)
Image Sensor	CMOS
Processing Speed	High-speed processing
Connectivity	Ethernet
I/O	Digital I/O
Operating System	Embedded OS
I/O Ports	Ethernet, USB