Omron fh series - LED Safety (FHV Series)

29
7. Appendix Saving and Loading a Project
The following describes the procedures to save a Power PMAC IDE project on the computer, and to
reuse it.
7.1. Saving a Project
1
Creating a Configuration File
Create a Configuration File to
save parameters you have
changed.
Right-click Configuration in the
Solution Explorer, and select
Generate Config File.
A Configuration File is added to
Configuration.
2
Enter a file name in the textbox,
then click the OK button.
3
Right-click on the Configuration
File, and from the menu, select
Check To Download Config File
to include it in files to be
downloaded.