H5CC
2
Other Features
Equipped with a Key Protect Function
Any abnormality in the device due to malfunctioning or setting errors
can be prevented.
Follows the Ratings, Characteristics, and
Functionality of the H5CX-@-N
The H5CC follows the ratings, characteristics, and functionality of the
H5CX-@-N.
Output ON/OFF Inversion Function
Conventionally, the output turns ON when the set value is reached,
however, when this function is used, the output can be turned OFF
when the set value is reached. As a result, the man-hours involved in
checking the wiring can be reduced.
Reset Operation
To prevent operational errors, reset by pressing and holding RST
keys (+ and - on the left). Then, when the reset is enabled, you will be
visually guided by blinking LEDs. Note: For details, refer to
Nomenclature on page 11.
Model Number Structure
Model Configuration
H5CC Series
Type
Standard Type
H5CC-A Series
Model H5CC-A@ H5CC-AU@ H5CC-A11@ H5CC-AWSD
Function
Timer Yes No
Twin Timer Yes No
Two-stage settings/
forecast output
No
Yes
Operating modes
Timer: 15 modes
Twin Timer: 4 modes
Timer:
2 modes
Input NPN/PNP input (For the H5CC-A11F, only NPN input is available.)
External connections Screw terminal block 11-pin socket Screw terminal block
External power supply None Provided None
Instantaneous contact None
Gate input Supported
Power supply voltage 100 to 240 VAC, 12 to 48 VDC/24 VAC, 24 to 240 VDC/VAC (only for the H5CC-@F) 12 to 48 VDC/24 VAC
Type
Economy Type
H5CC-L Series
Model H5CC-L8@ H5CC-L8E@
Function
Timer Yes
Twin Timer Yes
Two-stage settings/
forecast output
No
Operating modes
Timer:
15 modes
Twin Timer:
4 modes
Timer:
4 modes
Twin Timer:
2 modes
Input NPN input None
External connections 8-pin socket
External power supply None
Instantaneous contact None Provided
Gate input Not supported
Power supply voltage
100 to 240 VAC, 12 to 48 VDC/24 VAC,
24 t
o 240 VDC/VAC (only for the H5CC-@F)
To Next Page
Loading...
