Timer/twin timer
selection mode
tim twn
*2
*1
Function
setting mode
* Use UP1+UP3 to move up and
DW1+DW3 to move down
shs
shs
Step2
The characters displayed in reverse video are the default settings. In the function setting mode, the status indicators of the
keys that can be set light up.
(Example) In the case of the set value upper limit 1
A value from 1 to 999999 can be set, and therefore the status indicators of the UP1 to UP6 Keys (DW1 to DW6 Keys) light up.
*
*
*
*
Change to Function Setting Mode.
To
next page
From
next page
(DOWN)(UP)
OFF time
range
ON time
range
Timer
mode
ON/OFF
start mode
( ) ( ) ( ) ( )
Flicker
OFF start 1
Flicker
On Start 1
Flicker
OFF start 2
Flicker
On Start 2
Note: Only Flicker OFF Start 1 or Flicker ON Start 1 can be selected for the H5CC-L8E@.
• Set the digits for the set value limit using the corresponding
UP1 to UP6 Keys (DW1 to DW6 Keys).
Set value
upper limit 1
Function Setting Mode
……
s
down
-----.-
------
---.---
up
----.--
……
s
-----.-
------
---.---
----.--
toff ton tof1 ton1
(999999)(1)
9999991
----.--
s
-----.-
s
------
s
--:--:--
hm s
s
----:--
hm
-----.-
h
------
h
---.---
-----.-
m
------
m
*1. If the mode is switched to the function setting mode during operation, operation will continue.
*2. Changes made to settings in function setting mode are enabled for the first time when the
mode is changed to run mode. Also, when settings are changed, the timer is reset (time
initialized and output turned OFF).
Display Set Value
Time Range List
For details, refer to Time Range List.
For details, refer to Time Range List.
• Set the OFF time range using the UP1 Key (DW1 Key).
• Set the ON time range using the UP1 Key (DW1 Key).
• Set the timer mode using the UP1 Key (DW1 Key).
• Set the twin timer output mode using the UP1 Key (DW1 Key).
0.01 s to 9999.99 s
(default setting)
0.1 s to 99999.9 s
1 s to 999999 s
0 h 0 min 01 s to 99 h 59 min 59 s
0 h 01 min to 9999 h 59 min
0.1 h to 99999.9 h
1 h to 999999 h
0.001 s to 999.999 s
0.1 min to 99999.9 min
1 min to 999999 min
Timer
Press the UP1 Key (DW1 Key)
to switch to a Twin Timer.
Tin timer
Power ON
Run mode
Power ON
Run mode
UP1+UP3 or DW1+DW3
(Press and hold for 2 s)
UP1+UP3 or DW1+DW3
(Press and hold for 2 s)
UP1+UP6 or DW1+DW6
(Press and hold for 2 s)
UP1+UP6 or DW1+DW6
(Press and hold for 2 s)
up
timm
----.--
oftr
toff
totm
tim
func
----.--
ontr
999999
sl1h
Step1
Switching to a Twin Timer
To Next Page
Loading...
