Omron H5CC - Page 27

2727
H5CC
Twin Timer
*1
• Set the indicator display mode using
the UP1 Key (DW1 Key).
Set the output inversion using the UP1 Key (DW1 Key).
(KP-1) (KP-2) (KP-3) (KP-4) (KP-5) (KP-6) (KP-7)
Indicator
display mode
*
*
(Normaly Close)(Normaly Open)
(Normaly Close)(Normaly Open)
(Normaly Close)(Normaly Open)
*
*
*
*
*
*
*
*
(Count status
display)
Output
inversion
Output 1
(OUT1)
inversion
Output 2
(OUT2)
inversion
Output
inversion
To
next page
From
next page
(1 ms)(20 ms)
(PNP input)(NPN input)
Input signal
width
NPN/PNP
input
Note: Displayed only when the model is not H5CC-L8E@ or H5CC-A11F.
Note: Displayed only when the model is H5CC-A@ or H5CC-A11@. (However, not displayed for H5CC-A11F.)
• Set the digits for the set value limit using the corresponding UP1 to UP6 Keys (DW1 to DW6 Keys).
Set value
upper limit 1
• Set the digits for the set value limit using the corresponding UP1 to UP6 Keys (DW1 to DW6 Keys).
Set value
upper limit 2
Note: Displayed only when the model is H5CC-L8E@.
(Instantaneous) (Time-limit)
Instantaneous/
time-limit
Function Setting Mode
(999999)(1)
999999
kp-2
kp-1
kp-3 kp-4 kp-5 kp-6 kp-7
1
(999999)(1)
9999991
alof allt
on
n-cn-o
n-cn-o
n-cn-o
2c1c1c
pnpnpn
20ms 1ms
(Indicator display
is turned OFF,
and the status
indicator is all off.)
(Indicator display
is turned OFF,
and the status
indicator is all lit.)
Key protect
level
*1
• Set the key protect level using the UP1 Key (DW1 Key).
From previous
page
To previous
page
When the model is not H5CC-L8E@
When the model is H5CC-L8E@
• Set the input signal width using the UP1 Key (DW1 Key).
• Set the NPN/PNP input mode using the UP1 Key (DW1 Key).
•
Set the function (instantaneous or time-limit operation) for the instantaneous output (out 1)
using
the UP1 Key (DW1 Key).
on
indc
n-o
ot-i
n-o
ot1i
n-o
ot2i
1c1c
otmd
999999
sl1h
999999
sl2h
kp-1
kypt
npn
imod
20m5
iflt