Omron H5CC - Page 38

H5CC
3838
Key Protect Level
When the key-protect switch is set to ON, it is possible to prevent setting errors by prohibiting the use of certain operation keys by specifying the
key protect level (KP-1 to KP-7). The key protect level is set in the function setting mode.
The key protect indicator is lit when the key-protect switch is ON.
*1. Changing mode to configuration selection mode or function setting mode.
*2. Switching between se
t1 (o
r set) and set2 (or 1) in the operating mode when the operating mode is z, ton, toff, ton1, or tof1.
Level Meaning
Details
Changing mode * 1
Switching display
during operation *2
Reset Key Up/Down Keys
KP-1
(default setting)
Invalid Valid Valid
Valid
KP-2 Invalid Valid Invalid Valid
KP-3 Invalid Valid Valid Invalid
KP-4 Invalid Valid Invalid Invalid
KP-5 Invalid Invalid Invalid Invalid
KP-6 Invalid Invalid Valid Valid
KP-7 Invalid Invalid Invalid Valid
H5CC
TIMER
*
* Factory-set to OFF
ON
(Enable)
OFF
(Disable)
Key protect