Omron H5CC - Page 42

H5CC
42
• When conforming to EMC standards, refer to the information
provided in this datasheet for cable selection and other conditions.
• This is a class A product. In residential areas it may cause radio
interference, in which case the user may be required to take
adequate measures to reduce interference.
• Basic insulation is provided between the po
wer supply and in
put
terminals. (No insulation is provided between the power supply and
input terminals for the H5CC-A11F.) Basic insulation is provided
between power supply and output terminals, and between input
and output terminals.
• When double insulation or reinforced insulation is required, apply
double insula
tion or r
einforced insulation as defined in IEC 60664
that is suitable for the maximum operating voltage with clearances
or solid insulation.
• Connect the input and output terminals to devices that do not have
any expose
d char
ged parts.
Conformance to EN/IEC Standards