H5CN
H5CN
203
Engineering Data
Switching operations (x 10 )
3
Load current (A)
Switching operations (x 10 )
3
Load current (A)
Reference: A maximum current of 0.15 A can be switched at 125 VDC (cos
%
= 1). Maximum current of 0.1 A can
be switched if L/R is 7 ms. In both cases, a life of 100,000 operations can be expected.
The minimum applicable load is 10 mA at 5 VDC (P reference value).
Operation
Timing Chart
Digital Display
UP Display DOWN Display
Note: For the models without digital display, an IN indicator (LED) is provided to indicate power application. (This LED, however, goes off
when the reset input is applied.)
Dimensions
Note: All units are in millimeters unless otherwise indicated.
10.9
97.6
44.8 x 44.8
To Next Page
Loading...
Need help?
General
