Omron H7BX-A - DIP Switch Settings

Total Counter/Time Counter (DIN 72 x 36) H7HP 11
Connections
■ Terminal Arrangement
Note: 1. Incremented for count 1 (CP1) inputs; decremented for count 2 (CP2) inputs.
2. Non-contact input is also available.
Operation
■ DIP Switch Settings
Switches 1 to 4 are all set to OFF before shipping.
H7HP-A/-AD
H7HP-C8/-C8D
Note: When the setting has been changed, turned power off and on
to continue. The display will show “0” when the power is turned
back on.
12 VDC0 V
56789
10 11
12
34
0 V
56789
10 11
12
34
12 VDC0 V
56789 1011
12
34
0 V
56789 1011
12
34
NPN mode
Unused Unused Unused
PNP mode
100 to 240 VAC
AC Models
H7HP-A
Unused Unused Unused
12 to 24 VDC
NPN mode
PNP mode
Unused Unused
Unused Unused Unused
NPN mode
PNP mode
100 to 240 VAC
Unused Unused Unused
12 to 24 VDC
NPN mode
PNP mode
Unused Unused
H7HP-C8
H7HP-C8D
DC Models
H7HP-AD
External power supply
12 VDC 50 mA max.
Power
supply
Power
supply
Key pro-
tection
input
Reset
input
Count 1
input or
start input
Count 2
input or
gate input
Power
supply
Key pro-
tection
input
Reset
input
Count 1
input or
start input
Count 2
input or
gate input
External power supply
12 VDC 50 mA max.
Power
supply
Power
supply
Key pro-
tection
input
Reset
input
Count 2
input
Power
supply
Key pro-
tection
input
Reset
input
Count 1
input
Count 2
input
Count 1
input
Pin no. Item OFF ON
1 Function Total counter Time counter
2 Counting speed 30 Hz 5 kHz
Time range 99999.9 h 99 h 59 min 59 s
3 Input mode (note) NPN PNP
4 Unused --- ---
Pin no. Item OFF ON
1 Unused --- ---
2 Counting speed 30 Hz 5 kHz
3 Input mode (note) NPN PNP
4 Unused --- ---