Omron H7CC-A Series - H7 CC-R; Key Protect Level

H7CC-R@
56
Key Protect Level
When the key-protect switch is set to ON, it is possible to prevent setting errors by prohibiting the use of certain operation keys by specifying the
key protect level (KP-1 to KP-7). The key protect level is set in the function setting mode.
The key protect indicator is lit when the key-protect switch is ON.
* Changing mode to function setting mode.
Level Meaning
Details
Changing mode*
Switching display
during operation
Hold operation Up/Down Keys
KP-1
(default setting)
Invalid Valid Valid Valid
KP-2 Invalid Valid Invalid Valid
KP-3 Invalid Valid Valid Invalid
KP-4 Invalid Valid Invalid Invalid
KP-5 Invalid Invalid Invalid Invalid
KP-6 Invalid Invalid Valid Valid
KP-7 Invalid Invalid Invalid Valid
Key protect
* Factory-set to OFF
ON
(Enable)
OFF
(Disable)
*