Omron HBF-510 - Troubleshooting Tips for Common Issues; Common Problems and Solutions

30
TROUBLESHOOTING TIPS
PROBLEM CAUSE AND SOLUTION
Low Battery Indicator
No power
No display appears on the unit
Check the battery installation for proper placement
of the battery polarities.
Replace all four worn batteries.
The weight value is displayed abnormally low or
high.
Place the monitor on a hard and level floor.
The Body Composition value is displayed
abnormally low or high.
Refer to RECOMMENDED MEASUREMENT
TIMES on pages 11 and 12.
Check the settings entered for your personal data.
Other conditions
Remove the batteries. Wait one minute.
Reinstall the batteries. Refer to BATTERY
INSTALLATION on page 16.