Omron HEM-609 - ERROR INDICATORS; Measurement and Battery;Unit Errors

17
ERROR INDICATORS
SYMBOL CAUSE CORRECTION
Movement during
measurement.
Press the START/STOP
button to turn the unit off.
Remove the monitor from
your wrist. Refer to
“Taking a Measurement”
on page 12.
Wait 2-3 minutes.
Take another measurement.
The cuff is not
wrapped securely.
Remove the monitor from
your wrist. Read, “Applying
the Wrist Cuff”on Page 11.
Wait 2-3 minutes.
Take another measurement.
Batteries are worn.
Replace the two “AAA”
batteries. Refer to page 8
for battery installation.
Cuff
over-inflated.
Repair Service Required.
Refer to Warranty
Information on page 20.
Abnormal
unit function.
Repair Service Required.
Refer to Warranty
Information on page 20.
HEM-609 Final 4/7/05 9:01 AM Page 17