9
SETTING THE DATE AND TIME
The Blood Pressure Monitor stores up to 90 measurement values
with the date and time. The monitor also calculates an average
reading based on the last three measurement values.
Set the monitor to the current date and time before taking
a measurement for the first time. If the current date and time
is not set, a default date and time will display.
1.
TO START THE SETTING
Press the SET button to adjust the date and time.
The year flashes on the display.
2.
SETTING THE YEAR
The year can be set between 2004 and 2030.
When the display reaches 2030, it will return
to 2004.
Press the MEM button to advance by increments
of one year.
Press the SET button to set the current year.
The month flashes on the display.
NOTE:
• Press and hold the MEM button to increase the values faster.
HEM-609 Final 4/7/05 9:01 AM Page 9
To Next Page
Loading...
Need help?
General
