BATTERY INSTALLATION
1. Press both sides of the battery cover and
slide the cover off in the direction of the arrow.
2. Install 2 “AAA” size batteries so the
+ (positive) and - (negative) polarities
match the polarities of the battery
compartment as indicated.
3. Replace the Battery Cover. Make sure the
battery cover is securely in place.
BATTERY REPLACEMENT
Initial Set-Up
When the Low Battery Indicator appears on the display screen
remove both worn batteries. Replace with two new batteries at the
same time. Long-life alkaline batteries are recommended.
When the Low Battery Indicator appears on the display screen
remove both batteries. Replace with two new 1.5V “AAA”
identical batteries at the same time. Long-life alkaline batteries
are recommended.
NOTE:
Measurement values stored in the memory will not be deleted
during battery replacement.
After replacing the batteries, reset the date and time. Refer to page
9, Setting the Date and Time.
Initial
Low Battery Indicator
8
HEM-609 Final 4/7/05 9:01 AM Page 8
To Next Page
Loading...
Need help?
General
