35
TAKING A MEASUREMENT
When your wrist reaches the level of your heart, the monitor beeps and the
symbol changes to the symbol. Hold your wrist in this position. Do
not move until the measurement is complete and the measurement values
are displayed on the screen.
NOTE: If you move your wrist higher or lower than your heart during the
measurement, the measurement will stop. An error will display on
the screen.
Turn the monitor off. Take another measurement and do not move
your arm.
When your wrist reaches the proper
position, the monitor beeps and
automatically starts inflation and
measurement.
Inflation Start Screen
Inflation in Progress Screen
Mark Indicating
Inflation in Progress
35
To Next Page
Loading...
