Omron HEM-7211 - Page 16

16
3. Using the Unit
Cuff Wrapping Guide
This monitor checks whether the cuff is applied correctly during
the inflation. When the cuff is applied correctly, is displayed
while taking a measurement or using the memory function. If
the cuff is not applied correctly, is displayed. Carefully read
and repeat the steps listed under section 3.1.
Note: Wait 2-3 minutes before taking another blood pressure
measurement. Waiting between readings allows the
arteries to return to the condition prior to taking the blood
pressure measurement.
Warning:
Self-diagnosis of measured results and treatment are
dangerous.
Please follow the instructions of your doctor.
2. Remove the arm cuff.
3. Press the START/STOP button to turn the monitor off.
The monitor automatically stores the measurement in its
memory.
It will automatically turn off after 2 minutes.
Important:
• Recent research suggests that the
following values can be used as a guide
to high blood pressure for measurements
taken at home.
This criteria is for home blood pressure measurement.
Systolic Blood Pressure Above 135 mmHg
Diastolic Blood Pressure Above 85 mmHg
HEM-7211-C1_B_M.book Page 16 Tuesday, April 27, 2010 4:00 PM