Omron HEM-7211 - To Delete All the Values Stored in Memory

19
3. Using the Unit
To View the Readings Stored in Memory
1. Press the button, while the average value is displayed.
The Memory number appears
for a second before the pulse
rate is displayed. The newest
set is numbered “1”.
2. Press the or button to view the readings stored in
memory.
: To the older readings
: To the more recent readings
To delete all the values stored in memory
When the memory symbol ( ) appears, first press the
Memory button. Then while holding it down, press the
START/STOP button simultaneously for about 2-3 seconds.
Note: You cannot partially delete the stored readings.
Alternating date/
time display
HEM-7211-C1_B_M.book Page 19 Tuesday, April 27, 2010 4:00 PM