11. Error Messages and Troubleshooting
EN
EN47
appears
The pulse rate is not detected correctly.
Apply the arm cuff correctly, then take another measurement.
Refer to sub-section 3.1.
Remain still and sit correctly during a measurement.
appears
appears
does not flash during
a measurement.
appears
The monitor has malfunctioned.
Press the BP [START/STOP] button again. If “Er” still appears,
contact local OMRON representatives.
BP reading display /
Problem
Possible Cause Solution
3294330-0B_HEM-7530T-AP3-EN_IM.book Page 47 Thursday, June 2, 2022 11:30 AM
To Next Page
