Omron HEM-757 - Omron HEM-757 Memory Function Usage

11
HOW TO USE THE MEMORY FUNCTION
How to Use the Memory Function
This monitor has the function to store fourteen measurement values.
Push the Button while a ( ) mark is displayed.
• Maximum of fourteen stored measurement values can be called
out.
• For the fifteenth measurements and after, the values from the
oldest measurement will be deleted.
START
Previous value Value before
the previous
measurement
Value of
fourteen
measurements
before
Push these two buttons at
the same time.
Display of memory deletion
If you want to delete all the stored data
You can delete all the stored data while the ( ) mark is displayed.