20
2. Transfer your readings.
As soon as the measurement is completed, your readings will be
automatically transferred, as shown below.
If the connection symbol “ ” does not appear, refer to
“Connection failure. / Data is not being transmitted.” in section 4.2 for
more detail.
3. After data transfer is completed, press the [START/STOP]
button to turn the monitor off.
It will automatically turn off after 2 minutes.
Note: Wait 2-3 minutes before taking another measurement. Waiting between
measurements allows the arteries to return to their prior condition to
taking a measurement.
To Next Page
Loading...
Need help?
General
