10
ACTIVITY MODE
The activity mode stores the measurement
values for a specified walking period or
session.
NOTE: You cannot check the current
display or memory function when
using the activity mode.
1. Press for two seconds from any of
the displays.
rotates when using the activity mode.
2. Start walking.
The display changes with each press of
to display the step count, distance,
calories burned, fat burned, and the time,
in that order.
3. Press for two seconds from any of
the display to finish the activity mode.
Press to view the measurement results
after the activity mode has finished (refer
to “USING THE MEMORY
FUNCTION” on page 15).
NOTE: Only one session can be stored in
memory for the activity mode.
HJ-203-AP_A_M.book Page 10 Wednesday, April 7, 2010 2:00 PM
To Next Page
Loading...
Need help?
General
