17
BATTERY LIFE AND REPLACEMENT
REPLACING THE BATTERY
1. Loosen the screw of the
battery cover on the
back of the unit, and
remove the battery
cover by pulling it off in
the direction of the
arrow.
Use a small screwdriver
to loosen the screw on the battery cover.
2. Remove the battery
with a thin, sturdy, stick
that will not break
easily.
NOTE: Do not use a pair
of metal tweezers or a screwdriver.
3. Insert the battery
(CR2032) with the
positive (+) side face up.
4. Replace the battery cover by sliding
the catch in first, then tighten the
screw.
Care and Maintenance
HJ-203-AP_A_M.book Page 17 Wednesday, April 7, 2010 2:00 PM
To Next Page
Loading...
Need help?
General
