To connect the AC Adapter
① Insert the AC Adapter Plug into the AC Adapter Jack on the back side
of the monitor as illustrated.
② Plug the AC Adapter into a 120V AC outlet (60 cycles).
To disconnect the AC Adapter
① Hold and pull the housing to remove the AC Adapter from the
electrical outlet. Do not remove by pulling the cord.
② Remove the AC Adapter plug from the monitor.
WARNING
Do not plug or unplug the power cord into the electrical outlet with
wet hands.
CAUTION
Do not overload power outlets. Plug the device into the appropriate
voltage outlet.
14
USING THE AC ADAPTER
Housing
Cord
BP755IM_E_SP_q6_R2.qxd 5/26/09 4:14 PM Page 14
To Next Page
Loading...
