The monitor is designed to store the blood pressure and the pulse
rate in the memory for two people (USER A and USER B) every time a
measurement is completed.
The monitor automatically stores up to 60 sets of measurement values
(blood pressure and pulse rate) for each user (A and B). When 60 sets of
measurement values are stored, the oldest record is deleted to save the
most recent values.
AVERAGING FUNCTION
The monitor calculates the average reading based on the three most
recent sets of measurement values taken within 10 minutes of the most
recent reading.
NOTES: • If two sets of measurement values are stored in the memory
for the 10 minutes period, the average is based on the two
sets of measurement values. If one set of measurement
values is stored, this is displayed as the average.
• When viewing the reading taken without setting the date and
time, “-:--” is displayed instead of the date and time.
USING THE MEMORY FUNCTION
30
To Next Page
Loading...
Need help?
General
