25
3. Using the Unit
EN
Selecting the Auto Mode
Auto Mode may be selected for either A or B user.
1. Make sure the unit is powered off.
2. Select your user ID (A or B).
3. Press and hold the SET button.
The auto mode symbol ( ) and the oFF setting appears on
the display.
4. Press the MEMORY button ( )
to select on.
Note: Press the MEMORY
button to alternate
between on and oFF.
HEM-7080IT-E.book Page 25 Monday, April 2, 2007 11:52 AM
To Next Page
Loading...
