Omron M10-IT User Manual

41
5. Handling Errors and Problems
EN
Care and maintenance
5. Handling Errors and Problems
5.1 Error Messages
Error Display Cause Remedy
Cuff is under inflated.
Carefully read and repeat the steps
listed under Chapter 3.3.
Movement during
measurement.
Cuff over inflated.
Batteries have run down.
Replace all four “AA” batteries with
new ones.
Refer to Chapter 2.1.
Movement, sound.
Carefully read and repeat the steps
listed under Chapter 3.3.
Cuff leaks air. Replace with a new cuff.
Blinks or appears
continuously.
HEM-7080IT-E.book Page 41 Monday, April 2, 2007 11:52 AM

Omron M10-IT Specifications

General

Type	Automatic
Cuff size	22 - 42 cm
Display type	LCD
Memory slots	168
Date imprinting	Yes
Number of users	2 user(s)
Speaking function	-
Placement supported	Upper arm
Battery type	AA
Number of batteries supported	4
Quantity per pack	1 pc(s)