33
3. Using the Unit
EN
3. Press the MEMORY button ( ) to display the most recent set
of individual measurement values on the screen. The values
are displayed from the most recent to the oldest.
Note: The date and time are
alternately displayed with the
measurement values.
Press the MEMORY button to display the next set of values.
Press and hold the MEMORY button to display the values
faster.
Auto mode
The average for the consecutive measurements appears on
the display with the auto mode symbol ( ). To display the
values for the individual measurements press the SET button
while the average is displayed.
4. Press the O/I START button to turn the unit off.
Alternating display
HEM-7080IT-E.book Page 33 Monday, April 2, 2007 11:52 AM
To Next Page
Loading...
