mmHg” in section 13 of instruction manual for additional information.
Read and follow the “Correct Disposal of This Product” in section 7 when disposing of the device and any used accessories or optional parts.
AC Adapter (optional accessory) Handling and Usage
Fully insert the AC adapter into the outlet.
When unplugging the AC adapter from the outlet, be sure to safely pull from the AC adapter. DO NOT pull from the AC adapter cable.
When handling the AC adapter cable:
Do not damage it. / Do not break it. / Do not tamper with it.
DO NOT pinch it. / Do not forcibly bend or pull it. / Do not twist it.
DO NOT use it if it is gathered in a bundle.
DO NOT place it under heavy objects.
Wipe any dust off of the AC adapter.
Unplug the AC adapter when not in use.
Unplug the AC adapter before cleaning this monitor.
Battery Handling and Usage
DO NOT insert batteries with their polarities incorrectly aligned.
ONLY use 4 “AA” alkaline or manganese batteries with this monitor.
DO NOT use other types of batteries. DO NOT use new and used batteries together. DO NOT use different brands of batteries together.
Remove batteries if this monitor will not be used for a long period of time.
If battery fluid should get in your eyes, immediately rinse with plenty of clean water. Consult with your physician immediately.
If battery fluid should get on your skin, wash your skin immediately with plenty of clean, lukewarm water. If irritation, injury or pain persists, consult with your physician.
DO NOT use batteries after their expiration date. · Periodically check batteries to ensure they are in good working condition.
3. General Precautions
To stop a measurement, press the [START/STOP] button while taking a measurement.
When you take a measurement on the right arm, the air tube should be at the side of your elbow. Be careful not to rest your arm on the air tube.
Blood pressure may differ between the right and left arm, and may result in a different measurement value. Always use the same arm for measurements. If the values
between both arms differ substantially, check with your physician on which arm to use for your measurements.
When using an optional AC adapter, make sure not to place your monitor in a location where it is difficult to plug and unplug the AC adapter.
Battery Handling and Usage
Disposal of used batteries should be carried out in accordance with local regulations.
The supplied batteries may have a shorter life span than new batteries.
Remember to have a record of your blood pressure and pulse readings for your physician. A single measurement does not provide an accurate indication of your true blood
pressure. Please use the Blood Pressure Diary to keep records of several readings over a certain period of time. To download PDF files of the diary, visit www.omron-
healthcare.com.
Error Messages and Troubleshooting
If any of the below problems occur during measurement, check to make sure that no other electrical device is within 30 cm. If the problem persists, please refer to the table
below.
Display/Problem Possible Cause Solution
appears or the
arm cuff does not inflate.
The [START/STOP] button was
pressed while the arm cuff is not
applied.
Press the [START/STOP] button again to turn the monitor off. After inserting the air plug securely and
applying the arm cuff correctly, press the [START/STOP] button.
Air plug is not completely
plugged into the monitor.
Insert the air plug securely.
The arm cuff is not applied
correctly.
Apply the arm cuff correctly, then take another measurement. Refer to section 5 of instruction manual
.
Air is leaking from the arm cuff.
Replace the arm cuff to the new one. Refer to section 12 of instruction manual .
appears or a
measurement cannot be
You move or talk during a
measurement and the arm cuff
does not inflate sufficiently.
Remain still and do not talk during a measurement. If “E2”
To Next Page
Loading...
Need help?
General
