Omron Max Power Relief PM500 - 13. SPECIFICATIONS; Device Identification and Power; Electrical and Performance Parameters; Physical and Environmental Conditions

34
Product Name OMRON Max Power Relief
Model #
PM500
REF
HV-F023-Z
Power Source DC 3 V
(2 AAA alkaline batteries or 2 AAA manganese batteries)
Battery Life New batteries (2 AAA alkaline batteries) will last for approx. 4
months (when used for 15 minutes a day, Lower Back Mode, max.
intensity).
Frequency Approx. 1 to 238 Hz
PULSE Duration 150 μsec
Maximum Output Voltage 70 V (during 500 Ω load)
Power Control 15 intensity levels
Operating and Storage
Conditions (When using
product)
+50 °F to +104 °F (+10 °C to +40 °C),
30 to 80 % RH (non-condensing), 700 to 1060 hPa
Transportation Conditions -4 °F to +140 °F (-20 °C to +60 °C),
10 to 95 % RH, 700 to 1060 hPa
Weight
Approx. 3.5 oz (100 g) (incl. batteries)
Outer Dimension Approx. 2” (W) × 4.4” (H) × 1” (D)
(52 mm × 112 mm × 25 mm)
Classication of ME equipment Internally powered
IP classication IP 22
Operation Mode Continuous operation
Applied Part Type BF (Pads)
Durable period (Service Life) Device: 5 years
Pad: 150 uses
NOTE: These specications are subject to change without notice.
This OMRON product is produced under the strict quality system of OMRON
HEALTHCARE Co. Ltd., Japan.
Designed for a minimum of 5 years life expectancy.
IP classication is degrees of protection provided by enclosures in accordance with IEC
60529. This device is protected against solid foreign objects of diameter 12.5 mm such as
a nger and greater, and against oblique falling water drops which gives trouble to normal
operation.
13. SPECIFICATIONS