Omron Max Power Relief PM500 - 7. ASSEMBLY STEPS; STEP 1 - INSERT BATTERIES

16
Before using your unit, ensure that:
1. The cord is not broken.
2. The gel pad is not damaged.
3. The electrode cord connection is not broken.
4. The unit is intact and working.
5. There is no battery leakage.
STEP 1 – INSERT BATTERIES
1 Remove the battery cover on the back using a coin.
Battery Cover
2 Insert batteries. Make sure the signs correspond when inserting batteries.
3 Reinstall the battery cover.
Tighten with a coin.
7. ASSEMBLY STEPS