Omron Max Power Relief PM500 - 7. ASSEMBLY STEPS; STEP 2 - ATTACH ELECTRODE CORD TO THE MAIN UNIT; STEP 3 - SNAP ELECTRODE CORD TO PADS

17
7. ASSEMBLY STEPS
STEP 2 – ATTACH ELECTRODE CORD TO THE MAIN UNIT
Attach the electrode cord plug to the bottom of the main unit.
STEP 3 – SNAP EITHER ELECTRODE CORD TO EACH OF THE PADS
For the rst time, take the pads out of the sealed package.
CAUTION
• Do NOT turn unit on until pads are on your skin.
• Therapy won’t work with just one pad. You MUST
USE TWO PADS at the same time.
NOTE:
Pads will not stick if the skin has too much hair. We
recommend shaving the area for effective treatment.