Omron MX2 Basic - Introduction and Usage Guidance; How to Obtain Meaningful Blood Pressure Readings

3
MX2 Basic English
Insert batteries
1 Slide off the battery cover. 2 Insert four batteries as indicated in the
battery compartment and close
compartment
Caution! Use four identical 1.5V
batteries type AA!
PULSE/
m
i
n
SYS
mmHg
DIA
mmHg
M
X2 Ba
s
ic
Connect cuff
1 Insert air plug in air jack.
K
F
Fit cuff
Caution! Do not inflate the cuff when not
wrapped around the arm!
1 Bare your arm.
Caution! Push up your sleeve: avoid
constricting the blood flow!F Air tube
K Ring
3 Preparation
2 Pass the end of the cuff through the ring.
Caution! Keep the air tube on the
outside!
3 Put your arm through the loop.
Note: keep the tube even with your
middle finger.
1-2 cm
24031902 MX2 Basic GB 01-10 3/25/04 1:51 PM Pagina 3