4 - 31
4 System Program
NA-series Programmable Terminal Hardware(-V1) User’s Manual (V125)
4-4 System Menu Details
4
4-4-10 Operation Log Viewer
In the Operation Log Viewer, you can check the logs recorded when operations specified on Sysmac
Studio are executed on the NA unit.
There are three ways to start the Operation Log Viewer as shown below.
•Select Operation Log Viewer from the System Menu.
• Execute the ShowOperationLogViewer action.
• Execute the ShowOperationLogViewer function.
Starting from the System Menu
1 Display the System Menu and select Operation Log Viewer.
2 Operation Log Viewer starts up.
4-4-10 Operation Log Viewer
Starting and Exiting Operation Log Viewer
To Next Page
Loading...
