Omron NA5-12W101B-V1

4 - 37
4 System Program
NA-series Programmable Terminal Hardware(-V1) User’s Manual (V125)
4-4 System Menu Details
4
4-4-11 Safety Monitor
All NA5 Series Programmable Terminals support the Safety Monitor. To use the Safety Monitor, an SD
memory card needs to be inserted into the NA unit.
The equipment that can be monitored is as follows.
 CPU Unit
• NJ-series CPU Unit
• NX-series CPU Unit
 Communication Control Unit
•NX-CSG320
 Safety Controller Unit
• NX-SL5
• NX-SL3
 Safety I/O Unit
• NX-SIH400
• NX-SID800
• NX-SOH200
• NX-SOD400
 Connection path
System configuration
Directly connected to the CPU unit Via an EtherCAT coupler unit
NJ-series CPU Unit Not supported Supported
NX-series CPU Unit
Supported
*1
*1. Only NX102- supports it.
Supported
NX-CSG320 Supported Not supported