22
List of Optional Parts
– Materials are indicated by
abbreviations.
ABS : Acrylonitrile-butadiene-ethylene
resin
EVA : Ethylene vinyl acetic acid resin
PMP : Polymethyle pentane
PP : Polypropylene resin
PS : Polyethylene resin
SEBS : Styrene elastomer
Medication cup
(4997211-8)
Used to transmit the ultrasonic
vibration. (If it has any damage or
deformation, the unit may not be able
to nebulise. Handle this part carefully.)
Material: PP
Packaging unit: 5 cups
Bacterial filter
(4997213-4)
Used for inhalation such as for
tracheal lavage.
Materials: filter; PP, connector; PMP
Packaging unit: 1 filter + 1 adapter
Air filter set
(4997214-2)
Protects the unit from the dust in air.
Materials: case; PP, filter; PS
Packaging unit: 1 set
Air filter
(4997215-0)
Material: PS
Packaging unit: 5 filters
Nebulisation set
(4997216-9)
Used for normal nebulisation.
Materials: medication cup; PP,
medication cup holder; ABS,
medication cup cover; PMP, packing;
silicone
Packaging unit: 1 set
Long time nebulisation set
(4997217-7)
Used for continuous nebulisation.
To be used in combination with the
supply medication set (4997206-1).
Materials: cover; PMP, cap; silicone
Packaging unit: 1 set
Mouthpiece set
(4997212-6)
Used for inhalation by being held by
the mouth.
Material: EVA
Packaging unit: 5 sets
Inhalation mask (L) set
(4997205-3)
Attached with the fixing rubber string.
Enables the simultaneous inhalation
by mouth and nose.
Material: SEBS
Packaging unit: 3 sets
Inhalation mask (S) set
(4997207-0)
Attached with the fixing rubber string.
Exclusive for the inhalation by mouth.
A size that can be used by an infant.
Material: SEBS
Packaging unit: 3 sets
Inhalation hose M (70 cm) with a
cuff having the diameter of 20 mm
(4997209-6)
White hose guide tube (cuff) can be
removed and installed.
Attach it to the hose by rotating
clockwise. Cut it to the proper length.
Material: SEBS
Packaging unit: 1 hose
Supply medication set
(4997206-1)
Supplies the meditation in order to keep
the medication in the medication cup at
a certain level. Used for humidifying or
inhalation for a long time.
Material: PP
Packaging unit: 1 set
Inhalation hose S (30 cm) with a
cuff having the diameter of 20 mm
(4997208-8)
White hose guide tube (cuff) can be
removed and installed.
Attach it to the hose by rotating
clockwise. Cut it to the proper length.
Material: SEBS
Packaging unit: 1 hose
Inhalation hose L (150 cm) with a
cuff having the diameter of 20 mm
(4997210-0)
White hose guide tube (cuff) can be
removed and installed.
Attach it to the hose by rotating
clockwise. Cut it to the proper length.
Material: SEBS
Packaging unit: 1 hose
Adapter
(4997218-5)
Material: PMP
Used for connecting 22 mm parts
e.g. bacterial filter.
(20/22mm, ISO compatible)
Washer, 5 pcs
(4997285-1)
Materials: silicone
Optional Medical Accessories
(within the scope of EC Medical Device Directive 93/42/EEC)
EN
To Next Page
Loading...
