6. EtherNet/IP Settings
9
6. EtherNet/IP Settings
This section describes the specifications such as communication parameters and variables
that are defined in this document.
Hereinafter, the Displacement Sensor is referred to as the "destination device" in some
descriptions.
6.1. EtherNet/IP Communications Settings
The Controller settings are as follows:
Controller (node 1) Displacement Sensor (node 2)
IP address 192.168.250.1 192.168.250.2
Subnet mask 255.255.255.0 255.255.255.0 (default)
MEMLNK
(Memory link function)
- EIP (EtherNet/IP)
To Next Page
Loading...
