Omron NJ Series

7．EtherCAT Connection Procedure
26
7.4.2. Checking the Data that are Sent and Received
Confirm that the correct data are sent and received.
Always confirm safety at the Destination Device before you transfer a user
program, configuration data, setup data, device variables, or values in memory
used for CJ-series Units from the Sysmac Studio.
The devices or machines may perform unexpected operation regardless of the
operating mode of the CPU Unit.
1
Select Watch Tab Page from the
View Menu.
2
The Watch1 Tab Page is displayed
in the lower section of the Edit
Pane.
3
Enter the following names in the
Watch1 Tab Page for monitoring.
Click a column under the Name
Column to enter a new name.
E001_Status_SID_6010_01:
counter data (value is updated
periodically)
4
Confirm that the Online value is
updated periodically.